Solar Film Transmission Meter - UV IR Rejection & Visible Light Tester for Thin Film with 3-Value Display | Perfect for Auto Tinting, Window Film Testing & Solar Panel Efficiency Measurement

Introduction * Solar Film Transmission Meter is able to simultaneously measure and display UV, IR rejection value and visible light transmission value. * This meter is self-contained light sources and self-calibration. No manual adjustment is needed. It is suitable for the transmittance (barrier ratio) test of automotive film, architectural film, thermal film, film glass, etc. * The users only need plug the power supply, turn on the switch and put the solar film in the opening. The resulting performance data appear on the display. Technical Specifications * Size: 160mm*115mm*33mm(L*W*H) * Testing opening: Wide 23mm * Height 76 mm * Weigh: 425g * Resolution: 0.1% * Accuracy: +/-2%(Colorless and transparent material) * UV Peak wavelength: 365nm * VL Peak 380-760nm, conforming to the CIE photopic vision function standard * IR Peak wavelength: 940nm *4*AA alkaline battery（Battery Not Included In the Package） Features * UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device. * Self-calibration and auto-calibration, NO need any manual adjustments * Simple operation, putting the testing sample in the opening, UV Rejection, IR Rejection, Visible light transmission value of the sample will simultaneously display.

◆ UV Rejection meter, IR Rejection meter, Light Transmittance Meter, Three function in ONE device

◆ Self-calibration and auto-calibration, NO need any manual adjustments; Automatically calibrated to 100% transmittance after power on.

◆ The operation is simple and the measurement is fast. Simply put the object to be tested into the test slot and immediately display the three test results at the same time.

◆ UV Peak wavelength: 365nm; VL Peak wavelength: 380-760nm, conforming to the CIE photopic vision function standard; IR Peak wavelength: 940nm

◆ The users only need plug the power supply, turn on the switch and put the solar film in the opening. The resulting performance data appear on the display.